Niagara 35 Drawings

Tankage

A 1983 drawing of a Diesel Fuel Tank for a Niagara 35.
A 1978 drawing of a Special Water Tank for a Niagara 35.
A 1980 drawing of a Holding Tank for a Niagara 35.
A 1986 drawing of a Standard Water Tank for a Niagara 35.

Update: 2013-03-11: On replacing the original plastic water tanks in my Niagara 35 (Hull No. 55, built 1979) I had new tanks made of stainless steel based on the original 1986 drawing found here. The tanks as built to drawing did not fit in the existing space under the port and starboard settees. The issue was the lower outboard corner of the tank sitting on the curve of the hull at the forward end of the locker. I caution anyone doing the same to measure the existing space very carefully before ordering new tanks.

Spars and Fittings

A 1983 drawing of the Winch Base Castings for a Niagara 35.
A 1978 drawing of the Spinnaker Mast Track for a Niagara 35.
A 1978 drawing of the Boom for a Niagara 35.
A 1983 drawing of a Boom Clew End Casting for a Niagara 35.
A 1983 drawing of a Boom Gooseneck Casting for a Niagara 35.
A 1983 drawing of a Gooseneck Bracket Casting for a Niagara 35.
A 1982 drawing of the Spreader Section for a Niagara 35.
A 1978 drawing of a Masthead Halyard Sheave for a Niagara 35.
A 1983 drawing of a Masthead Halyard Sheave for a Niagara 35.
A 1979 drawing of a Masthead Toggle for a Niagara 35.
A 1983 drawing of a Masthead Toggle for a Niagara 35.
A 1984 drawing of the Mast Extrusion for a Niagara 35.
A 1983 drawing of a Mast Step Casting for a Niagara 35.
A 1983 drawing of the Spreader Base Casting for a Niagara 35.

Hull Fittings

A 1983 drawing of a Stemhead Casting for a Niagara 35.
A 1983 drawing of a Bobstay Anchor Casting for a Niagara 35.
A 1983 drawing of the Transom Corner Castings for a Niagara 35.
A 1978 drawing of a Chain Plate Cover for a Niagara 35.
A 1983 drawing of an Emergency Tiller Head Casting for a Niagara 35.
A 1978 drawing of Link Plates for a Niagara 35.
A 1983 drawing of the Masthead Casting for a Niagara 35.
A 1983 drawing of a Rudder Flange Casting for a Niagara 35.

| marine survey | cruising under sail | resources | FAQ | contact | gallery |